Configurar Roteador Netgear Wgr614v7 Como Bridge 😀

July 11, 2023 talmari

How to Set Up Your Netgear Wgr614v7 Router as a Bridge in 5 Easy Steps

A bridge mode is a configuration that allows you to connect two or more routers together without creating a separate network. This can help you extend the wireless coverage of your main router, or use different features of each router, such as parental controls or guest networks.

In this article, we will show you how to set up your Netgear Wgr614v7 router as a bridge in 5 easy steps. You will need two routers: one that acts as the main router (also called the base station), and one that acts as the bridge (also called the repeater). We will assume that both routers are already configured and working properly.

Step 1: Connect your Netgear Wgr614v7 router to your computer

The first step is to connect your Netgear Wgr614v7 router to your computer using an Ethernet cable. Plug one end of the cable into any of the LAN ports on the router, and the other end into the Ethernet port on your computer. Make sure that both devices are turned on.

Step 2: Access the router’s web interface

The next step is to access the router’s web interface using a web browser. Open your browser and type http://192.168.1.1 in the address bar. This is the default IP address of the Netgear Wgr614v7 router. If you have changed it before, use the new IP address instead.

You will be prompted to enter a username and password. The default username is admin and the default password is password. If you have changed them before, use the new credentials instead.

Step 3: Enable wireless repeating function

The third step is to enable the wireless repeating function on the Netgear Wgr614v7 router. This will allow it to act as a bridge and connect wirelessly to the main router.

On the router’s web interface, click on Wireless Settings under Setup. Scroll down to Wireless Repeating Function and check the box next to Enable Wireless Repeating Function. Then, select Wireless Repeater from the drop-down menu next to Wireless Mode.

Step 4: Enter the main router’s information

The fourth step is to enter the main router’s information on the Netgear Wgr614v7 router. This will allow it to connect to the main router and join its network.

You will need to know the following information about your main router:

The SSID (network name)
The wireless channel
The security mode and password (if any)
The MAC address (also called physical address)

You can find these information on your main router’s web interface, or on a label on the bottom or back of the device.

On the Netgear Wgr614v7 router’s web interface, enter the SSID of your main router in the field next to Repeater SSID. Then, enter the wireless channel of your main router in the field next to Channel. Make sure that both routers use the same channel.

If your main router has wireless security enabled, select the same security mode from the drop-down menu next to Security Options. Then, enter the same password in the field next to Passphrase.

Finally, enter the MAC address of your main router in the field next to Base Station MAC Address. You can enter it with or without colons or dashes.

Step 5: Apply and reboot

The last step is to apply and reboot your Netgear Wgr614v7 router. This will save your settings and restart your device.

On the router’s web interface, click on Apply at the bottom of the page. Wait for a few seconds until you see a confirmation message. Then, unplug the power cord from your Netgear Wgr614v7 router and plug it back in after 10 seconds.

Your Netgear Wgr614v7 router should now be set up as a bridge and connected wirelessly to your main router. You can disconnect it from your computer and place it where you want to extend your wireless coverage.

How to test your bridge mode

After setting up your Netgear Wgr614v7 router as a bridge, you can test if it is working properly by checking the following:

The wireless LED on your Netgear Wgr614v7 router should be solid green, indicating that it is connected to your main router.
The wireless network name (SSID) of your Netgear Wgr614v7 router should be the same as your main router.
You should be able to access the Internet from any device connected to your Netgear Wgr614v7 router, either wirelessly or via Ethernet.
You should be able to access the web interface of your main router from any device connected to your Netgear Wgr614v7 router, by typing its IP address in your browser.

If you encounter any problems, you can try the following troubleshooting steps:

Make sure that both routers are using the same wireless channel and security mode.
Make sure that you have entered the correct MAC address of your main router on your Netgear Wgr614v7 router.
Make sure that both routers are within the wireless range of each other.
Make sure that there are no sources of interference or obstacles between the routers, such as cordless phones, microwave ovens, or walls.
Try rebooting both routers and reconnecting them.

How to disable bridge mode

If you want to disable bridge mode on your Netgear Wgr614v7 router and use it as a normal router again, you can do so by following these steps:

Connect your Netgear Wgr614v7 router to your computer using an Ethernet cable.
Access the router’s web interface using a web browser and enter your username and password.
Click on Wireless Settings under Setup.
Uncheck the box next to Enable Wireless Repeating Function.
Select Access Point from the drop-down menu next to Wireless Mode.
Click on Apply at the bottom of the page.
Unplug the power cord from your Netgear Wgr614v7 router and plug it back in after 10 seconds.

Your Netgear Wgr614v7 router should now be disabled as a bridge and restored as a normal router. You can configure it according to your preferences and needs.

How to configure your main router

Before setting up your Netgear Wgr614v7 router as a bridge, you may need to configure your main router to allow it to connect. Depending on your main router’s model and firmware, you may need to do one or more of the following steps:

Disable DHCP on your main router. DHCP is a function that assigns IP addresses to devices on your network. If you have two routers with DHCP enabled, they may conflict with each other and cause connection problems. To disable DHCP on your main router, access its web interface and look for the DHCP settings under the LAN or Network section. Uncheck the box next to Enable DHCP Server or similar option and save your settings.
Enable WDS or Wireless Distribution System on your main router. WDS is a feature that allows wireless routers to communicate with each other and form a wireless bridge. To enable WDS on your main router, access its web interface and look for the WDS settings under the Wireless or Advanced section. Check the box next to Enable WDS or similar option and save your settings.
Add the MAC address of your Netgear Wgr614v7 router to the list of allowed devices on your main router. Some routers have a security feature that only allows devices with specific MAC addresses to connect to them. To add the MAC address of your Netgear Wgr614v7 router to the list of allowed devices on your main router, access its web interface and look for the MAC Filtering or Wireless Access Control settings under the Wireless or Security section. Enter the MAC address of your Netgear Wgr614v7 router in the field provided and save your settings.

For more details on how to configure your main router, refer to its user manual or contact its manufacturer.

How to change the settings of your Netgear Wgr614v7 router

If you want to change the settings of your Netgear Wgr614v7 router after setting it up as a bridge, you can do so by following these steps:

Connect your Netgear Wgr614v7 router to your computer using an Ethernet cable.
Access the router’s web interface using a web browser and enter your username and password.
Click on Wireless Settings under Setup.
Make the changes you want, such as changing the SSID, channel, security mode, password, etc.
Click on Apply at the bottom of the page.
Unplug the power cord from your Netgear Wgr614v7 router and plug it back in after 10 seconds.

Your Netgear Wgr614v7 router should now have the new settings applied. You can also change other settings of your router, such as LAN settings, firewall settings, parental controls, etc., by accessing other sections of the web interface.

How to configure your devices to connect to the bridge mode

After setting up your Netgear Wgr614v7 router as a bridge, you can connect your devices to it and enjoy the extended wireless coverage. You can connect your devices either wirelessly or via Ethernet, depending on your preference and availability.

To connect your devices wirelessly, you need to scan for the wireless network name (SSID) of your main router and enter the password (if any). You should be able to see the same SSID on both routers, since they are using the same network. You can connect to either one of them and get the same Internet access.

To connect your devices via Ethernet, you need to plug an Ethernet cable into any of the LAN ports on your Netgear Wgr614v7 router and the other end into the Ethernet port on your device. You should be able to access the Internet without any additional configuration.

You can connect as many devices as you want to your Netgear Wgr614v7 router, as long as they do not exceed the maximum number of devices supported by your main router. You can check this number on your main router’s user manual or web interface.

How to update the firmware of your Netgear Wgr614v7 router

Updating the firmware of your Netgear Wgr614v7 router can help you improve its performance, stability, and security. Firmware is the software that runs on your router and controls its functions. Netgear regularly releases firmware updates for its routers to fix bugs, add features, and enhance compatibility.

To update the firmware of your Netgear Wgr614v7 router, you need to do the following steps:

Download the latest firmware file for your Netgear Wgr614v7 router from the Netgear support website. Make sure you download the correct file for your model and version.
Connect your Netgear Wgr614v7 router to your computer using an Ethernet cable.
Access the router’s web interface using a web browser and enter your username and password.
Click on Router Upgrade under Maintenance.
Click on Browse and locate the firmware file that you downloaded in step 1.
Click on Upload and wait for the firmware update process to complete. Do not turn off or disconnect your router during this process.
When the firmware update is done, your Netgear Wgr614v7 router will reboot automatically. Wait for it to restart and reconnect to it.

Your Netgear Wgr614v7 router should now have the latest firmware installed. You can check the firmware version on the web interface under Status.

Conclusion

In this article, we have shown you how to set up your Netgear Wgr614v7 router as a bridge and connect it to your main router. This can help you extend your wireless coverage and use different features of each router. We have also shown you how to configure your main router, your devices, and your Netgear Wgr614v7 router to work with the bridge mode. We have also shown you how to update the firmware of your Netgear Wgr614v7 router to improve its performance, stability, and security.

We hope that this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Thank you for reading!

86646a7979